下载vimgdb73和vim73
mkdir -p ./tmp
cd tmp
tar zxvf ../vim-7.3.tar.gz
unzip ../vimgdb-for-vim7.3-master.zip
mv vimgdb-for-vim7.3-master vimgdb-for-vim7.3
patch -p0 <vimgdb-for-vim7.3/vim73.patch
cd vim73
安装依赖
sudo apt-get install build-essential
sudo apt-get build-dep vim-gtk
sudo apt-get install libncurses5-dev
安装
// 这里直接执行make的操作
make
sudo make install
安装vimgdb runtime
cd ../vimgdb-for-vim7.3
cp vimgdb_runtime ~/.vim/bundle
打开vim
:helptags ~/.vim/bundle/vimgdb_runtime/doc " 生成doc文件
添加配置.vimrc
" vimgdb插件
run macros/gdb_mappings.vim
在vim中执行gdb时,报 “Unable to read from GDB pseudo tty” 的错误,因为没有安装 gdb ,所以安装gdb
sudo apt-get install gdb
2、安装vundle
set up vundle
$ git clone https://github.com/gmarik/vundle.git ~/.vim/bundle/vundle
Configure Plugins
在.vimrc文件的开头添加下面的内容,有些不是必须的,可以注掉
set nocompatible " be iMproved, required
filetype off " required
" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/vundle/
call vundle#rc()
" alternatively, pass a path where Vundle should install plugins
"let path = '~/some/path/here'
"call vundle#rc(path)
" let Vundle manage Vundle, required
Plugin 'gmarik/vundle'
" The following are examples of different formats supported.
" Keep Plugin commands between here and filetype plugin indent on.
" scripts on GitHub repos
Plugin 'tpope/vim-fugitive'
Plugin 'Lokaltog/vim-easymotion'
Plugin 'tpope/vim-rails.git'
" The sparkup vim script is in a subdirectory of this repo called vim.
" Pass the path to set the runtimepath properly.
Plugin 'rstacruz/sparkup', {'rtp': 'vim/'}
" scripts from http://vim-scripts.org/vim/scripts.html
Plugin 'L9'
Plugin 'FuzzyFinder'
" scripts not on GitHub
Plugin 'git://git.wincent.com/command-t.git'
" git repos on your local machine (i.e. when working on your own plugin)
Plugin 'file:///home/gmarik/path/to/plugin'
" ...
filetype plugin indent on " required
" To ignore plugin indent changes, instead use:
"filetype plugin on
"
" Brief help
" : PluginList - list configured plugins
" : PluginInstall(!)- install (update) plugins
" : PluginSearch(!) foo - search (or refresh cache first) for foo
" : PluginClean(!) - confirm (or auto-approve) removal of unused plugins
"
" see :h vundle for more details or wiki for FAQ
" NOTE: comments after Plugin commands are not allowed.
" Put your stuff after this line
Install Plugins
Launch vim and run
: PluginInstall
vim +PluginInstall +qall
3、官方vim-lang插件
Config vim file .vimrc,Add content bellow in bottom of the file
" 官方的插件
" Some Linux distributions set filetype in /etc/vimrc.
" Clear filetype flags before changing runtimepath to force Vim to
" reload them.
filetype off
filetype plugin indent off
set runtimepath+=$GOROOT/misc/vim
filetype plugin indent on
syntax on
autocmd FileType go autocmd BufWritePre Fmt
4、代码补全的插件gocode
配置go的环境变量,比如我的配置,GOPATH变量是必须要配置的,PATH中必须把GOPATH的bin也添加进去,否则没有自动提示,会提示找不到模式
export GOROOT=/usr/local/go
export GOPATH=/data/app/gopath
export PATH=$PATH:$GOROOT/bin:$GOPATH/bin
Set up gocode
Then you need to get the appropriate version of the gocode, for 6g/8g/5g compiler you can do this:
go get -u github.com/nsf/gocode (-u flag for "update")
Configure vim in .vimrc file
Plugin 'nsf/gocode', {'rtp': 'vim/'}
Install Plugins
Launch vim and run
: PluginInstall
vim +PluginInstall +qall
写一个helloword程序,输入fmt后按<C-x><C-o>如果能看到函数的声明展示出来,说明安装是正确的。
4、代码跳转提示godef
Set up godef
go get -v code.google.com/p/rog-go/exp/cmd/godef
go install -v code.google.com/p/rog-go/exp/cmd/godef
git clone https://github.com/dgryski/vim-godef ~/.vim/bundle/vim-godef
Configure vim in .vimrc file
Bundle 'dgryski/vim-godef'
Install Plugins
Launch vim and run
: PluginInstall
vim +PluginInstall +qall
5、代码结构提示gotags
Set up gotags
go get -u github.com/jstemmer/gotags
Put the following configuration in your vimrc:
Bundle 'majutsushi/tagbar'
nmap :TagbarToggle
let g:tagbar_type_go = {
\ 'ctagstype' : 'go',
\ 'kinds' : [
\ 'p:package',
\ 'i:imports:1',
\ 'c:constants',
\ 'v:variables',
\ 't:types',
\ 'n:interfaces',
\ 'w:fields',
\ 'e:embedded',
\ 'm:methods',
\ 'r:constructor',
\ 'f:functions'
\ ],
\ 'sro' : '.',
\ 'kind2scope' : {
\ 't' : 'ctype',
\ 'n' : 'ntype'
\ },
\ 'scope2kind' : {
\ 'ctype' : 't',
\ 'ntype' : 'n'
\ },
\ 'ctagsbin' : 'gotags',
\ 'ctagsargs' : '-sort -silent'
\ }
命令模式下按在右边就会显示当前文件下的函数名,结构体名等等,光标放到相应的tag上,按回车可以快速跳到程序中的相应位置。
再次按会关闭tag窗口。
PS:本地的.vimrc的配置
" 插件管理器 vundle
set nocompatible " be iMproved, required
filetype off " required
" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/vundle/
call vundle#rc()
" alternatively, pass a path where Vundle should install plugins
"let path = '~/some/path/here'
"call vundle#rc(path)
" let Vundle manage Vundle, required
Plugin 'gmarik/vundle'
" The following are examples of different formats supported.
" Keep Plugin commands between here and filetype plugin indent on.
" scripts on GitHub repos
" Plugin 'tpope/vim-fugitive'
" Plugin 'Lokaltog/vim-easymotion'
" Plugin 'tpope/vim-rails.git'
" The sparkup vim script is in a subdirectory of this repo called vim.
" Pass the path to set the runtimepath properly.
" Plugin 'rstacruz/sparkup', {'rtp': 'vim/'}
" scripts from http://vim-scripts.org/vim/scripts.html
" Plugin 'L9'
" Plugin 'FuzzyFinder'
" scripts not on GitHub
" Plugin 'git://git.wincent.com/command-t.git'
" git repos on your local machine (i.e. when working on your own plugin)
" Plugin 'file:///home/gmarik/path/to/plugin'
" ...
"
filetype plugin indent on " required
" To ignore plugin indent changes, instead use:
" filetype plugin on
"
" Brief help
" : PluginList - list configured plugins
" : PluginInstall(!) - install (update) plugins
" : PluginSearch(!) foo - search (or refresh cache first) for foo
" : PluginClean(!) - confirm (or auto-approve) removal of unused plugins
"
" see :h vundle for more details or wiki for FAQ
" NOTE: comments after Plugin commands are not allowed.
" Put your stuff after this line
syntax on
" ********************************************************************
" 这里省略了其它不相关的插件
" vimgdb插件
run macros/gdb_mappings.vim
" 官方的插件
" Some Linux distributions set filetype in /etc/vimrc.
" Clear filetype flags before changing runtimepath to force Vim to
" reload them.
filetype off
filetype plugin indent off
set runtimepath+=$GOROOT/misc/vim
filetype plugin indent on
syntax on
autocmd FileType go autocmd BufWritePre <buffer>Fmt
" 代码补全的插件
Bundle 'Blackrush/vim-gocode'
" 代码跳转提示
Bundle 'dgryski/vim-godef'
" 代码结构提示
Bundle 'majutsushi/tagbar'
nmap <F8>:TagbarToggle<CR>
let g:tagbar_type_go = {
\ 'ctagstype' : 'go',
\ 'kinds' : [
\ 'p:package',
\ 'i:imports:1',
\ 'c:constants',
\ 'v:variables',
\ 't:types',
\ 'n:interfaces',
\ 'w:fields',
\ 'e:embedded',
\ 'm:methods',
\ 'r:constructor',
\ 'f:functions'
\ ],
\ 'sro' : '.',
\ 'kind2scope' : {
\ 't' : 'ctype',
\ 'n' : 'ntype'
\ },
\ 'scope2kind' : {
\ 'ctype' : 't',
\ 'ntype' : 'n'
\ },
\ 'ctagsbin' : 'gotags',
\ 'ctagsargs' : '-sort -silent'
\ }
Go语言由Google公司开发,并于2009年开源,相比Java/Python/C等语言,Go尤其擅长并发编程,性能堪比C语言,开发效率肩比Python,被誉为“21世纪的C语言”。Go语言在云计算、大数据、微服务、高并发领域应用应用非常广泛。BAT大厂正在把Go作为新项目开发的首选语言。
Go语言能干什么?
1、服务端开发:以前你使用C或者C++做的那些事情,用Go来做很合适,例如日志处理、文件系统、监控系统等
2、DevOps:运维生态中的Docker、K8s、prometheus、grafana、open-falcon等都是使用Go语言开发
3、网络编程:大量优秀的Web框架如Echo、Gin、Iris、beego等,而且Go内置的 net/http包十分的优秀
4、Paas云平台领域:Kubernetes和Docker Swarm等
5、分布式存储领域:etcd、Groupcache、TiDB、Cockroachdb、Influxdb等
6、区块链领域:区块链里面有两个明星项目以太坊和fabric都使用Go语言
7、容器虚拟化:大名鼎鼎的Docker就是使用Go语言实现的
8、爬虫及大数据:Go语言天生支持并发,所以十分适合编写分布式爬虫及大数据处理。
部署简单。Go编译生成的是一个静态可执行文件,除了glibc外没有其他外部依赖。这让部署变得异常方便:目标机器上只需要一个基础的系统和必要的管理、监控工具,完全不需要操心应用所需的各种包、库的依赖关系,大大减轻了维护的负担。这和Python有着巨大的区别。由于历史的原因,Python的部署工具生态相当混乱【比如setuptools,distutils,pip,buildout的不同适用场合以及兼容性问题】。官方PyPI源又经常出问题,需要搭建私有镜像,而维护这个镜像又要花费不少时间和精力。
并发性好。Goroutine和channel使得编写高并发的服务端软件变得相当容易,很多情况下完全不需要考虑锁机制以及由此带来的各种问题。单个Go应用也能有效的利用多个CPU核,并行执行的性能好。这和Python也是天壤之比。多线程和多进程的服务端程序编写起来并不简单,而且由于全局锁GIL的原因,多线程的Python程序并不能有效利用多核,只能用多进程的方式部署如果用标准库里的multiprocessing包又会对监控和管理造成不少的挑战【我们用的supervisor管理进程,对fork支持不好】。部署Python应用的时候通常是每个CPU核部署一个应用,这会造成不少资源的浪费,比如假设某个Python应用启动后需要占用100MB内存,而服务器有32个CPU核,那么留一个核给系统、运行31个应用副本就要浪费3GB的内存资源。
良好的语言设计。从学术的角度讲Go语言其实非常平庸,不支持许多高级的语言特性但从工程的角度讲,Go的设计是非常优秀的:规范足够简单灵活,有其他语言基础的程序员都能迅速上手。更重要的是Go自带完善的工具链,大大提高了团队协作的一致性。比如gofmt自动排版Go代码,很大程度上杜绝了不同人写的代码排版风格不一致的问题。把编辑器配置成在编辑存档的时候自动运行gofmt,这样在编写代码的时候可以随意摆放位置,存档的时候自动变成正确排版的代码。此外还有gofix,
govet等非常有用的工具。
执行性能好。虽然不如C和Java,但通常比原生Python应用还是高一个数量级的,适合编写一些瓶颈业务。内存占用也非常省。